General Construction Silicone Sealant Silicone Structural Adhesive 300ml

• Customization: Available
• Application: Automobile, Construction
• Bonding Function: High Temperature Resistant Adhesive
• Model NO.: 995
• Color: Clear
• Composition: Organic Material
• Morphology: Paste
• OEM Service: Yes
• Free Sample: Yes
• Shelf Life: 1 Year
• Package Available: 55g, 85g, 100g, 300ml, 200kg
• Certificate: ISO/Ts16949, MSDS
• Material: Silicone
• Classification: Room Curing
• Characteristic: Waterproof
• CAS No.: 9006-65-9
• Formula: Mixture
• EINECS: 230-391-5
• Main Agent Composition: Silicone
• Promoter Composition: Rubber
• Transport Package: 30PCS/Carton
• Specification: 310ml/cartridge
• Trademark: Customized
• Origin: China
• HS Code: 3506100010
• Production Capacity: 500000PCS/Month

Product Description

Gerneral purpose silicone sealant, silicone structural adhesive 300ml/cartridge for building



Characteristics:

one-component, fast cure, good thixotropy, easy to inject, high-classified red rtv silicone gasket maker/adhesive. it can make almost any gasket instantly by replacing mostly cut gaskets without causing metal corrosion. no dripping on elevation coating, and no shrinkage after cured. Also,it can tolerant the high temperature up to 320°c and has excellent resistance of oil, water, and transmission fluid.

Technical data sheet:
 

Description	Acetoxy, Neutral
Appearance	Paste
Specific Gravity ( g/cm3)	1.05~1.10
Skin time( min) T: 22°C, R.H.: 40% ~ 60%	3~5
Tack free time(min) T: 22°C, R.H.: 40% ~ 60%	20
Cure Rate (mm)  T: 22°C, R.H.: 40% ~ 60%	4.0
Hardness(shore A)	>35
Elongation, %	>200
Tensile Strength, N/mm2	>2.10
Lifespan	1 year
Color	Blue, black, red, grey, white and clear
Packing	35g, 55g, 85g, 100g and 310ml
Working Temperature	-60°C to 320°C
Packing type	85g/card, 120pcs/carton. Carton size: 46x28x44 cm
	100g/card, 120pcs/carton. Carton size: 46x28x44 cm

 
PRIVATE LABLE SERVICE IS HIGHLY WELCOME, AND MOQ IS 30000PCS EACH COLOR.
 

User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease
2. Remove the cap, puncture inner seal of the tube, screw on nozzle with a desired size
3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. or completely surround all bolt holes
4. Wait about 10 minutes for glue to skin over. Then reassemble the parts
5. Gasket maker dries to touch in 1 hour and allow to bond after 24 hour fully curing.


Notes:
1. Clean the assembled parts by removing the oil and grease.
2. it will release some acid odor when assemble the parts, so using in an adequate ventilated place.
3. Screw the nozzle tightly after using in order to avoid its curing inside the tube
4.Keep away from children.