High Temperature Grey 999 RTV Silicone Gasket Maker for Car, Neutral RTV Silicone Sealant

• Customization: Available
• CAS No.: 9006-65-9
• Formula: Mixture
• Model NO.: 3+3 grey
• EINECS: 230-391-5
• Bonding Function: High Temperature Resistant Adhesive
• Morphology: Paste
• Application: Automobile
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Silicone
• Characteristic: Waterproof
• Promoter Composition: Rubber
• Composition: Organic Material
• Color: Grey
• Transport Package: 85g/Blister Card
• Specification: 120pcs/carton
• Trademark: 3+3
• Origin: China
• HS Code: 3506100010
• Production Capacity: 20000PCS/Day

Product Description

Grey/Black/Red/Blue/Clear/White/Green, Acetoxy cure oil resistant gasket maker. Chemical resistance and good weather resistance. Apply for assembly or repair of gearboxes, pumps, valves and engines.





Characteristics:

Grey color, instant sealant, medium viscosity, low extension, good oil resistance and antifreezing. Suitable for sealing joint surface with high rigidity.

Technical data sheet:
 

Description	Acetoxy, Neutral
Appearance	Paste
Specific Gravity ( g/cm3)	1.05~1.10
Skin time( min) T: 22°C, R.H.: 40% ~ 60%	3~5
Tack free time(min) T: 22°C, R.H.: 40% ~ 60%	20
Cure Rate (mm)  T: 22°C, R.H.: 40% ~ 60%	4.0
Hardness(shore A)	>35
Elongation, %	>200
Tensile Strength, N/mm2	>2.10
Lifespan	1 year
Color	Blue, black, red, grey, white, clear, green
Packing	35g, 55g, 85g, 100g and 310ml
Working Temperature	-60°C to 320°C
Packing type	85g/card, 120pcs/carton. Carton size: 46x28x44 cm
	100g/card, 120pcs/carton. Carton size: 46x28x44 cm

 
PRIVATE LABLE SERVICE IS HIGHLY WELCOME, AND MOQ IS 30000PCS EACH COLOR.
 
We can customize 35g,55g,85g,100g packing in blister card depend on your request.

Applications:
Sealing and anti-shaking of engines, valve cages, bonnets and other mechanical parts in cars, motorcycles, farming machines, also, seal in high-temp fields, like in machinery, electronic, chemicals, and hardware, etc.

 
User's Guide:
1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease
2. Remove the cap, puncture inner seal of the tube, screw on nozzle with a desired size
3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. or completely surround all bolt holes
4. Wait about 10 minutes for glue to skin over. Then reassemble the parts
5. Gasket maker dries to touch in 1 hour and allow to bond after 24 hour fully curing.

Notes:
1. Clean the assembled parts by removing the oil and grease.
2. it will release some acid odor when assemble the parts, so using in an adequate ventilated place.
3. Screw the nozzle tightly after using in order to avoid its curing inside the tube
4.Keep away from children.