TS-5016 is heat cure epoxy caulking adhesive for powder coating. It's the replacement of Teroson EP 5016.
Substrate Type:
Hot dip Galvanized Steel, Electro Galvanized Steel, Galvannealed Steel, Cold Rolled Steel.
Product Application:
It is used in the body shop of metal bonding. TS5016 provides improved impact resistance, stiffness, and durability in the structure.
Curing Method:
Heat curable. Normally, heating temperature is 190ºC, and curing time is 30 minutes. It can resist 223ºC for some hours in oven.
Product Technology:
TS5016 is a heat curing, solvent free, metal to metal adhesive with good storage stability based on epoxy resins. The meterial can be spot-welded through and will reach maximum strength with curing temperature between 155ºC to 200ºC. The product exhibits excellent strength and corrosion and resistance at temperature extremes or after extensive aging and weathering. It provides exceptional impact resistance over a wide temperature range.
Technical Data Sheet:
| Colo |
White |
| Odor |
None |
| Appearance |
Consistency Paste |
| Solids |
≥99% |
| Specific Gravity |
≤1.2 |
| Lab Shear Strength @ 23ºC |
≥25MPa |
| T-Peel @ 23ºC |
≥250N/25mm |
| Viscosity |
40mm parallel plate, 50ºC, shear rate 1/s 30-50 Pa.s |
| Impact Peel Resistance @ 23ºC |
ISO 11343(2m/s), 1.6mm CRS |
| Bake 15 minutes @ 155ºC |
≥35N/mm |
| Shear Strength @ 23ºC |
1.6mm CRS |
| Bake 15 minutes @ 155ºC |
≥25MPa |
| Application Temperature |
30ºC - 40ºC |
How to use:
1, Part surface should be no oil, dust and impurity
2, Apply the adhesive on parts according to technological requirements. Adhesive thinnest part should be over 1mm. Control the air pressure at 0.4-0.8 Mpa when using pneumatic gun.
3, Heat cure. At 160-190ºC for 30 minutes, the adhesive will full cure.
Packing:
310ml/tube, net weight 460g/tube
){kind=link}