Anaerobic flange sealant ,Non corrosive anaerobic sealant 515. Can 100% replace Loctite 515
Product Features:
1, general purpose;
2, flexible adhesive layer after curing;
3, gaps fill up to 0.25mm of rigid machined flanges.
Product description
| Appearance (uncured) |
Purple paste |
| Chemical Type |
Methacrylate Ester |
| Components |
One component |
| Strength |
Medium |
| Viscosity |
High, thixotropic |
| Cure |
Anaerobic |
| Application |
Flange sealing |
Typical application
Taisn 515 is designed for the general purpose. The maximum fill gap is 0.25mm. It can form flexible adhesive layer after curing. It can be used in such aspects as below:
1, Engine casings
2, Flange sealant for chemistry equipments
3, Sewing equipments
4, Gearbox assembly
Typical properties of uncured material
| Gravity @25°C |
1.13 |
| Viscosity, 25°C, mPa•s (cP): |
100,000 to 300,000 |
| Curing speed(Solid-time early/ Solid all-time) |
10min/24hr |
| Flash point |
>93°C |
Typical properties of cured material (Low carbonate grit blasted steel, @22°C,after 24hr full cured)
| Temperature (°C) |
-50 -200 |
| Shear strength ISO-10964 (N.m) |
3 - 7 |
| Coefficient of Thermal Expansion, ASTM D 696, K-1 |
80*10-6 |
| Coefficient of Thermal Conductivity, ASTM C 177, W/(m•K) |
0.10 |
Package
50ml/tube, 60pcs/carton
300ml/cartridge, 30pcs/carton
15kg/barrel
OEM service is highly welcome.
Audited Supplier 
){kind=link}
){kind=link}